Steam traps by GMI.

Steam traps

The steam trap is a standalone valve which automatically evacuates condensation that collects in a container full of water vapour, whilst remaining airtight in the presence of live steam or, if necessary, allowing a pre-determined or adjusted outflow of steam.

Bi-Metal Steam Traps

bi metal steam traps Materials : Carbon steel, Stainless steel, Cast iron
Class : PN40
Sizes : Up DN15 to DN25
End connections : Threaded: BSP, NPT
Welded: SW, BW
Flanges: PN16, PN20, PN25, PN40, PN50, Asa 150lbs, Asa 300lbs
On request:
-Strainer
-Check valve

Thermostatic Steam Traps

thermostatic steam traps Materials : Carbon steel, Stainless steel
Class : PN40
Sizes : Up DN8 to DN25
End connections : Threaded: BSP, NPT
Welded: SW, BW
Flanges: PN16, PN20, PN25, PN40, PN50, Asa 150lbs, Asa 300lbs

Thermodynamic Steam Traps

thermodynamic steam traps Materials : Carbon steel, Stainless steel
Class : PN40
Sizes : Up DN8 to DN25
End connections : Threaded: BSP, NPT
Welded: SW, BW
Flanges: PN16, PN20, PN25, PN40, PN50, Asa 150lbs, Asa 300lbs

Float Type Steam Traps

Float type steam traps Materials : Cast iron, Carbon steel, Stainless steel
Class : PN16, PN25, PN40
Sizes : Up DN15 to DN50
End connections : Threaded: BSP, NPT
Welded: SW, BW
Flanges: PN16, PN20, PN25, PN40, PN50, Asa 150lbs, Asa 300lbs
Our offer is drawn up to satisfy the specific operating conditions of your application. Our global offer is based on:
-The steam trap design, whether mechanical, thermodynamic, or thermostatic.
-Operating pressure,
-Operating temperature,
-The flow rates to be evacuated.
-Compatibility of the body and seal materials with the fluid being conveyed.
Homepage - Shut-off - Control - Safety control - Others - Data sheets - News - Links - Glossary